RiggingAndHanging

• Run the pipe through the truss. This allows the truss to serve as a fail-safe in case the cheeseboroughs fail. With vertical truss, this centers the weight.
• If running multiple cross-bars to vertical truss, attach some to the front of the truss and some to the back.

Box Truss - Line up segments of box truss such that the open sides face the same

  direction and the diagonal bracing has a continuous flow from one segment to
  the next.

- Please be consistant in the direction that bolts face - it makes disassmbly

  easier.

- Get a second person to double check that the bolts are tight. We've had

  examples of wobbly things that could have led to Disaster.

- When attaching a base to truss that will have pipe & drape run near it,

  consider if a pin should be attached to the base for that purpose.

- Face the open side of the truss at the stage. This isn't critical, but it

  does leave open the possibility of front-hanging some instrument that doesn't
  fit on the crossbars.

Adding a crossbar of schedule-40 iron pipe to box truss - Run the pipe through the truss. This centers the weight and allows the truss

  to serve as a fail-safe in case the cheeseboroughs fail.

- If running multiple cross-bars, attach some to the front of the truss and

  some to the back.

- Since bottom-hanging lights is easier than top-hanging, space the crossbars

  appropriately.

Hanging Lights - Ensure that the fixture is not hung upside-down. - Every instrument should have a safety cable. Leave enough slack to allow for

  focussing, but don't allow too much looseness.

- Leave the clip for the gel frame open, to make loading gels easier. - When top-hanging, make damn sure that the damnit nut is secure. - Make sure that no handles, knobs, or nuts are too tight to be easily worked

  during focus.

Notes for Hanging Elipsopidals - Pull all of the shutters all the way out. - If no iris is to be inserted, make sure the cover is secure over that slot.